Tag Archive: project

Converting ATX Power Supply to Lab Bench Power Supply F.A.Q.

atx_psu_faq

Since I’m receiving at least a couple of questions each day about my tutorial video on Converting Computer ATX Power Supply to Lab Bench Power Supply and I can’t answer them all, I thought it’s time to answer to the most frequently asked questions. If you think that I forgot to highlight some important question(s), …

Continue reading »

ATtiny2313 Based Thermostat Final Update

Finally, I had some time to do video on my thermostat project, and to upload all the project files.

USB Audio Multiplexer

On my desktop PC I have a speakers and a headphones. Usually I use headphones, but when I need to switch to speakers I need to physically plug in speakers instead of headphones to my PC’s soundcard. I wanted to solve this problem for a long time, but never get around of that until recently …

Continue reading »

ATtiny2313 – Based Thermostat Project Update #2

First fully working revision of firmware is finished, which takes all 2k of ATtiny2313′s memory. I wrote it in C, and I wanted to implement some other functionality, but unfortunately I’m out of space(of course if I would want to, I can put there ATtiny4313, which is identical to ATtiny2313, but has 4k of memory). …

Continue reading »

PWM Generator Project (part1)

Very often when designing some stuff I need a square wave signal generator with variable pulse width and frequency to control power MOSFETS. You can use such a tool when designing DC-DC converter or switch-mode power supply, you can use it to emulate PWM from microcontroller when developing some new embedded design, or maybe you …

Continue reading »

ATtiny2313 – Based Thermostat Project (part 3)

ATtiny2313 – Based thermostat project update. I wrote a small test firmware for it to test if everything is wired up the right way and to test it’s current consumption. And it turns out that there were some mistakes.. Also it’s current consumption is well below 150mA that I was expecting.

ATtiny2313 – Based Thermostat Project (part 2)

So I’ve came back to my ATtiny2313 – based thermostat project, that I’ve started to work on some time ago. And today I have assembled a first prototype (actually I only need a couple of these). If you haven’t seen video I’ve made on this project, you can watch it here: Part1 Video. It’s based …

Continue reading »

LM317 Adjustable Power Supply Followup

In this followup video I’ll show some problems that I encountered with my power supply from the previous tutorial video and will show you how I fixed those. It shows that even with the simplest project where “nothing can go wrong” you can’t predict every problem that could happen.

Simple Adjustable Linear Power Supply (Based Around LM317)

How to build your own linear adjustable power supply based on LM317. In this tutorial I’ll explain how linear power supply works, what parts it consists of and a lot of small details, like how to calculate smoothing capacitor value, or how to choose a transformer. Plus you’ll see how to build an actual power …

Continue reading »

Portable Fume Extractor / Fan

I’ve got a new tool on my workbench – portable fume extractor. It’s 92mm fan that works from 4 AA batteries and has a variable speed. Mobility is a really good thing, especially when you’ve got a tons of equipment and cables on a bench you can drown in.

Older posts «